SmartStone Energy Solutions

Our priority service

Failed Cavity Wall Insulation Extraction

Damp patches, cold rooms or a survey that flagged your walls? We remove failed cavity wall insulation from homes and rental properties across Shropshire and North Wales, then leave the cavity clean, dry and ready to refill.

TrustMarkNational Insulation AssociationInstallation Assurance AuthorityIAAFGreen Deal ApprovedSafeContractorCheckatradeKnaufStylite CavithermInstagroupFoam MastersSWIP

When cavity insulation needs to come out

Insulation in a wall cavity is meant to stay dry and keep heat in. When it gets wet, slumps, was the wrong material for an exposed wall or was badly installed, it can bridge moisture from the outer brick to the inner wall. The result is damp, mould and a home that is harder to heat.

  • Damp or mould on inside walls, often worse after rain
  • Rooms that stay cold even though the walls were insulated
  • Insulation installed many years ago, sometimes 20 years or more
  • Staining or tide marks on walls after wet weather
  • Problems flagged by a surveyor when buying or selling

How we extract cavity wall insulation

Every job starts with a survey so we know what material is in the wall and why it has failed. If extraction is the right answer, our team follows a set process:

  • Small access holes are drilled in the outer brickwork
  • Compressed air is blown in to loosen the old insulation
  • Industrial vacuums draw the insulation and debris out of the cavity
  • We inspect the cavity with a borescope camera to check it is clear and to spot any damage
  • Holes are sealed and the brickwork made good, ready for refill if required

After extraction

Once the cavity is clear we can refill it with a modern insulation suited to your wall and exposure, or advise on remedial works such as brick repairs, repointing or a new damp proof course where the survey shows it is needed. We have carried out extract and refill projects for housing associations and police buildings, and the same team works on private homes and rental properties.

SmartStone is TrustMark registered, a member of the National Insulation Association and works to the PAS 2035:2023 retrofit standard, with products backed by a 25-year insurance-backed guarantee.

Helpful guides

Frequently asked questions

Can failed cavity wall insulation cause damp?

Yes. When insulation in a cavity becomes wet or was unsuitable for the wall, it can carry moisture across to the inner leaf, leading to damp patches and mould on internal walls.

How long does extraction take?

It depends on the size of the property and the type of insulation in the wall. We give you a clear timescale after the survey.

Is there funding for extraction?

Depending on your eligibility, government funding may cover some or all of the work. We check current schemes for you as part of your quote.

Related

Book a survey with a local, accredited team

Based at Unit 5 Weston House, Oswestry. Covering Shropshire and North Wales for homeowners and landlords. Speak to Gary Hanson directly.

Get a free quote

No obligation. We reply Mon to Fri, 9am to 5pm.

Or call 0800 0239 272
Call WhatsAppQuote